Description
Rustic Art Hanging Hook
FOR PICTURES, MIRRORS, PHOTOGRAPHS, ETC
If you wish to hang your project similar this one, this kit will give you all the parts you will need.
All the components of this kit are available to buy separately.
-
- .
Step 1
Fit the cord loops to your frame. A pilot hole should be made to avoid splitting your frame. When hanging a picture mirror etc it will always stand off the wall further than traditional hangings. To compensate for this, put the cord loops 50mm in from the top of your picture
Leave plenty of rope as you can always pull it back.
Basically, you are weaving leaving lots of room and are then pulling the cord back through the hook
CUTING IMPORTANT BEFORE YOU START TO WEAVE CUT THE ROPE AS SHOWN BELOW
-
- TAPE
-
- CUT
-
- WRONG
When you weave this hook, you will get a small stump (fig 6) you can tidy this up with some scissors, or you can weave the hook in the other direction, so the stump is on the inside. Either way, you will have a nice fustic finish.
- 1
- 2
- 3
- 4
- 5
- 6
Our Best Rope Hanging Hook is designed to use with our picture hanging products. This hook is a very simple solution for hanging items with cord on a wall without the use of knots or ties. The weaving hook is simple to use, makes a very strong connection and does not need any skill to fit. The method of adding this weaving hook allows for adjustments after it has been fitted and is extremely quick to use. Just follow the above instructions .
Leave plenty of rope as you can always pull it back.
Roughly measure how much cord you need. This is not that crucial as you can adjust cord by moving back through the hook. The pictures will give you a guide of what you want to achieve. Starting from the end of the weaving hook, pull each loop back to give a tidy finish.
Step away and enjoy your new hanging
